1. Cabinet shell is composed of a full steel board by folding 10 times.The structure is strong.Bearing load is big. Scattered pulling force is strong.
2. ES serues abd PS series size can match each other.Parts and attachments'general utilization is stinstall quickly.

3. Open the frontal door singly or doubly.The hidden hinge which is above the ground 25mm is easy to install and convenient to displace.Open the big door by 130 degree.You may also change it into 180 degree.Onthe door,every 25mm,bore a hole,rectangle frame,which may both consolidate the door plank and convenient to wire and electricity appliance's installation.
4. The rear wall board uses screw fastening fastening.It is easy and convenient to install.The rear wall board may instead by door plank.
5. The installation board use slide rail to adjust the depth every 25mm.
6. The door,the cabinet,the rear wall board,installation board all have safe ground joint.
7. The bottom part has displaced special shrouding by three parts.You may dismantle the bored hole.Special line positioning is flexible.
8. The bottom seat is the same as PS series.(optional piece).
9. Surface disposal:get rid of oil,bonderized,electroph-oresis undercoat,spray water-proof plastic powder.
10.The international quality cabinet may displace attachment.
11.Main part color:RAL7032(Spray powder according to customer'sreuirements for color),Installation board,red¡¢yellow or galvanization.
12.Material:cold steel board or stainless steel .Door:2.0mm. Box:1.5mm. Installation board:2.5mm.
13.Customize all kinds of specification sizes and open hole variation according to customer's requirement.